Notice

WE’RE NOW OPEN MON-FRI | 7AM – 5PM ONLY

21805 FOOTHILL BLVD, HAYWARD, CA 94541 1-510-581-6804
Pankey's Radiator Repair
REQUEST SERVICE
REQUEST SERVICE 510-581-6804
  • Home
  • About Us
  • Industrial Radiators

    Service directory

    Find your equipment

    Explore radiator cleaning and repair by machine or cooling component.

    View all industrial radiators →

    Construction & Equipment

    • Caterpillar Radiators →
    • Caterpillar Dozer Radiators →
    • Excavator Radiators →
    • Loader Radiators →
    • Caterpillar Forklift Radiators →
    • Drill Rig Radiators →
    • Tractor Radiators →

    Fleet & Power

    • Heavy-Duty Radiators →
    • Truck Radiators →
    • Semi-Truck Radiators →
    • Generator Radiators →
    • Horizontal Generator Radiators →

    Heat Exchangers & Coolers

    • Industrial Heat Exchangers →
    • Marine Heat Exchangers →
    • Boat Heat Exchangers →
    • Aluminum Oil Coolers →
    • Copper Oil Coolers →
    • Charge Air & Turbocharger Coolers →
  • Radiator Repair
    • Auto Radiator Repair
    • Automotive Radiator Repair
    • Car Radiator Repair
    • Radiator Fix
    • Radiator Leak
    • Radiator Maintenance
    • Radiator Parts
    • Radiator Service
    • Replace Radiator
  • Radiator Repair
  • Blog
  • Contact
  • Home
  • About Us
  • Industrial Radiators

    Service directory

    Find your equipment

    Explore radiator cleaning and repair by machine or cooling component.

    View all industrial radiators →

    Construction & Equipment

    • Caterpillar Radiators →
    • Caterpillar Dozer Radiators →
    • Excavator Radiators →
    • Loader Radiators →
    • Caterpillar Forklift Radiators →
    • Drill Rig Radiators →
    • Tractor Radiators →

    Fleet & Power

    • Heavy-Duty Radiators →
    • Truck Radiators →
    • Semi-Truck Radiators →
    • Generator Radiators →
    • Horizontal Generator Radiators →

    Heat Exchangers & Coolers

    • Industrial Heat Exchangers →
    • Marine Heat Exchangers →
    • Boat Heat Exchangers →
    • Aluminum Oil Coolers →
    • Copper Oil Coolers →
    • Charge Air & Turbocharger Coolers →
  • Radiator Repair
    • Auto Radiator Repair
    • Automotive Radiator Repair
    • Car Radiator Repair
    • Radiator Fix
    • Radiator Leak
    • Radiator Maintenance
    • Radiator Parts
    • Radiator Service
    • Replace Radiator
  • Radiator Repair
  • Blog
  • Contact

Blog

Asphalt Paver Cooling Packages: Mapping the Radiator, Oil Cooler and Charge Air Cooler

COMPONENT NOTES · Industrial cooling · Hayward and the Bay Area

A paver cooling package can place several finned components close together. When the operator reports a temperature warning, calling the whole package “the radiator” can send the repair discussion in the wrong direction. Identify the circuit before deciding which component needs work.

This article provides a simple planning map for the engine radiator, hydraulic oil cooler and charge air cooler where fitted. It supports the specialized mobile-equipment cooling guide and should be used alongside the actual paver information.

Planning an asphalt-paver cooling-package assessment? Call (510) 581-6804 or send Pankey’s your equipment and component details.

One package, three fluid identitiesThree independent paths identify coolant, hydraulic oil and charge air. The common cooling package does not merge their fluids or component requirements.PANKEY’S / ORIGINAL FIELD DIAGRAM 13One package, three fluid identitiesCOOLANTOILCHARGE AIREngineHydraulicsTurboRadiatorOil coolerAir coolerOwn circuitOwn ratingsTo engine intakeCONCEPTUAL • NOT MODEL-SPECIFIC OR TO SCALE
Original Pankey’s diagram: Three independent paths identify coolant, hydraulic oil and charge air. The common cooling package does not merge their fluids or component requirements. Conceptual; not a service procedure.

Start with three separate heat-transfer jobs

The engine radiator carries coolant associated with engine cooling. The hydraulic oil cooler carries fluid in its assigned hydraulic circuit. A charge air cooler carries compressed intake air between the turbocharger and engine intake arrangement. Verify which assemblies the specific paver has before drawing the map.

Label the components from the manufacturer information and identification tags. Do not infer the fluid solely from a connection’s location or a parts-store description. A model, serial number and installed photographs help resolve variations and previous changes.

Caterpillar lists a hydraulic oil-cooler assembly for particular older paver models. That listing demonstrates an application-specific component identity; it is not a compatibility statement for a different paver sharing a similar model name. Confirm the actual configuration before ordering.

Keep the circuits separate even when the components share airflow. A leak in the coolant circuit and an oil-temperature warning should have different entries on the work order. The equipment technician can then decide which findings might be related.

Pankey’s Caterpillar radiator service, aluminum oil-cooler service and charge air cooler service provide relevant component categories. Use the identified assembly to choose the discussion, rather than asking for an undifferentiated cooling-package repair.

Map component order, airflow and access before removal

Photograph the package as installed. Show the order of the cores, screens, air seals, shrouds and any hinged or removable service arrangement. The order of the fluid circuits on a drawing does not necessarily match the order in which air crosses the package.

Keep any manufacturer airflow information with those photographs. The component shop may see only one removed core, while the equipment provider needs the original package context to investigate air delivery or material trapped between components.

Caterpillar’s AP1000/AP1055 update describes optional cooling prefiltration aimed at asphalt fines on those models. It is a useful example of an application-specific feature. Do not assume an older paver has the same filters or that retrofitting another arrangement is automatically appropriate.

Record material exposure and recent changes: fine buildup, a spill, damaged protection or previous cleaning. Describe what was actually observed and where. A clean front screen does not independently establish the condition between the cores.

Before separation, preserve connection orientation and component identity using the service team’s approved arrangements. Avoid relying on memory when several similar-looking assemblies are removed together. A clear installed map can prevent later confusion about which component was tested or repaired.

Map itemRecord
Fluid circuitCoolant, hydraulic oil or charge air
Component identityPart number and equipment serial number
Air pathCore order, seals, screen and shroud
ComplaintWarning, leak or observed deposit tied to the circuit

Have the warning and component circuit identified? Call (510) 581-6804 or send Pankey’s your equipment and component details.

Connect each symptom to the right investigation

Use the wording of the machine’s warning or fault record. An engine-coolant warning, hydraulic-oil warning and intake-air-related complaint are not interchangeable. Include when the warning occurred and which paver functions were operating.

If several circuits report higher temperatures, a shared-airflow question may be relevant, but it still requires investigation. Do not treat simultaneous warnings as proof that all cores are internally blocked. The machine provider should evaluate the applicable fan, control and installed-air-path conditions.

For a leak, record where fluid was first observed and whether the source was confirmed. Fluid can travel along frames or neighboring assemblies. The assessor needs to know whether a marked location is an operator report or a verified defect.

Keep bench findings and machine checks separate. An identified component leak can justify component work, while an operating complaint may still require evaluation of flow, controls or another part of the equipment. A successful component check does not close every cooling question.

If the cooling package has been modified, include the changes in the service record. A substitute core, altered shroud or changed connection can affect the identification and replacement discussion. Ask the responsible provider to confirm the application requirements rather than assuming the prior arrangement was correct.

Concept map · Three neighboring cores, three different circuits

01 · Radiator

Engine coolant circuit: identify its own symptom and component.

02 · Oil cooler

Hydraulic circuit: preserve ratings and machine-side findings.

03 · Charge air cooler

Engine air circuit: confirm fitment and appropriate component checks.

Read in order. Conceptual planning diagram; it does not replace the equipment manufacturer’s procedure.

Keep the package map with the repair and installation record

Send the shop the relevant component number, package photographs and circuit-specific complaint. Include any material exposure and cleaning already attempted. The work order should tell the assessor why that assembly was removed, not merely identify the machine as an asphalt paver.

Ask what inspection and testing support the recommended cleaning, repair or replacement. If findings change after preparation, agree on how the scope and schedule will be updated. An early estimate should not conceal uncertainty about an uninspected assembly.

During reinstallation, the equipment provider should follow the actual mounting, air-seal, connection and service instructions. The shop’s component work does not verify how the complete paver is reassembled. Retain the installed operating-check results alongside the component report.

Return to the mobile-equipment cooling guide for the broader fan and duty-cycle questions. A package map turns a general warning into a more useful conversation without pretending that a simple diagram replaces the paver’s service information.

Frequently asked questions

Does every asphalt paver use the same three-core arrangement?

No. Confirm the equipment’s actual configuration and component identities. This planning map describes distinct functions where fitted; it is not a model-specific schematic.

Can one shared fan cause concerns in more than one circuit?

A shared airflow issue may warrant investigation, but simultaneous warnings do not prove its cause. The equipment technician should evaluate the installed system and preserve the relevant operating conditions.

Can a component be identified only by paver model?

A model name may be insufficient because configurations and prior changes can differ. Include the equipment serial number, component tag and installed photographs before selecting repair or replacement options.

How Pankey’s can help

Pankey’s can discuss the identified radiator, oil cooler or charge air cooler within its industrial cooling-component services. Send the circuit map, readable identification and the findings already confirmed by the equipment provider.

Confirm the service scope before delivery. Paver controls, fan-drive diagnosis and complete-machine operating checks should be coordinated through the appropriate service provider, with the component findings retained in the same record.

Manufacturer references and further reading

  • Caterpillar: AP1000/AP1055 update — model-specific cooling prefiltration and service-access context.
  • Caterpillar: 281-4598 hydraulic oil cooler — an application-specific assembly example, not universal fitment.

Send the package map and component photographs. Call (510) 581-6804 or send Pankey’s your equipment and component details.

Filed under

  • Heavy-Duty Cooling
  • Industrial Oil Coolers
Request Service Industrial radiator cleaning and repair service illustration Ask about your equipment → Pankey's Radiator Repair Shop in Hayward HAYWARD · BAY AREABay Area equipment?
Let’s talk.
Call 510-581-6804 →
Mario and Paul, owners of Pankey's Radiator Repair Shop A CONVERSATION STARTS HERETalk with Mario & PaulShare the make, model and what you’re noticing.Discuss your service needs →

Industrial Radiators

21805 FOOTHILL BLVD, HAYWARD, CA 94541

  • SHOP HOURS
  • Please call to confirm current shop hours.

CALL US TODAY!

1-510-581-6804

EMAIL US TODAY!

REQUEST SERVICE
PANKEYS RADIATOR REPAIR SHOP, INC.
ADDRESS:

21805 FOOTHILL BLVD, HAYWARD, CA 94541

PHONE:

510-581-6804

EMAIL:

pankeysradiator@yahoo.com

SERVICE AREA

San Francisco Bay Area: Hayward, Oakland, Emeryville, Berkeley, San Leandro, Alameda, San Lorenzo, Union City, Fremont, Milpitas, Dublin, Pleasanton, Livermore, Danville, Walnut Creek, Concord, San Francisco and San Jose. Contact the shop to confirm arrangements for your equipment.

ORDER

SERVICE

Pankey's Radiator Repair Shop

    sitemap
    • Home
    • About Us
    • Radiator Repair
    • Blog
    • Contact Us
    • Industrial Radiators
    • Aluminum Oil Coolers
    • Boat Heat Exchangers
    • Caterpillar Forklift Radiator
    • Caterpillar Radiator
    • Copper Oil Coolers
    • Caterpillar Dozer Radiator
    • Drill Radiators
    • Excavator Radiator
    • Generator Radiator
    • Heavy Duty Radiator
    • Heat Exchanger
    • Horizontal Generator
    • Loader Radiator
    • Marine Heat Exchangers
    • Semi-Truck Radiator
    • Tractor Radiator
    • Truck Radiator
    • Charge Air Cooler

    PANKEY’S RADIATOR SHOP | COPYRIGHT 2026 | ALL RIGHTS RESERVED